Bolts Nuts and Washers-manufacture,factory,supplier from China

The Bolts, eye bolts, eye nuts and Nuts is manufactured by Hot/Cold forging process neatly and cleanly finished and have metric threads.Eye bolts threads is throughout their length and bolts threads is at 60% of their length.All the materials have bright surface finish. composition:1.The plain washers is cold punched2.Individual nuts and eye nut is used for special purposes, such as lock nuts.3.Before dispatch from the works one washer is fitted to each bolt, eye bolt, eye nut and a nut is screwed on the whole threaded length and left in this position.4.Each set of bolt and nut includes o

The bolt can be threaded for total length as per customers' requirement.

J bolts is supplied with one full nut and round washer. The material of the bolts is steel, strength grade designation 4.6. Screw threads is parallel throughout their length. After galvanizing, the nut can be easily screwed by hand over the whole threaded length. 

The bi-metal connector is designed to provide an effective corrosion barrier between the dissimilar metals aluminium and copper.The threads nuts and tapped holes is cut after galvanizing and well greased. All other threads is formed before galvanizing. Each PG is tightened  by two bolts with nuts and washers.

Rag bolts conforms with BS 1494, except that the bolts shall be 72mm long and they are supplied with M10 thread, coarse pitch, free fit.Each bolt is supplied with one full nut.Features:- Tensile strength: 352 N / mm2- Elongation (break): 33%- Code bending: 180°Measures:- Diameter: 10mm- Length: 72mm- Thickness of tube: 0.6mm- Unit weight: 21gramPackaging:Resistant cardboard box with the customer information in the visible part of the box. TECHNICAL SPECIFICATION: SpecificationLengthQuantity per cartonUnit weight gramWeight per carton(kg)10

Bimetal PG clamp is used in non-strain tapping or connecting to a line suitable for aluminium and copper conductors.Features:M12 bolts and nuts and washers : mild steelFinish: tin platedMinimum ampere rating: 300ATypeConductor mm²JBTL 16-12016-120JBTL 50-24050-240

Tie rods is supplied with four full nuts. The material of the rods is steel, strength grade designation 4.6 and meet the requirements for mechanical properties.

Galvanized steel cross arm dimensions: 2.5m x 10cm x 10cm x 10mm. Steel Galvanized Bolts and Nuts are equipped. All bolts and nuts made in hot dip galvanized steel and completely threaded.

ADSS optical cable suspension clamp components: 1.Aluminum clamp:made of corrosion-resistant aluminum alloy pressure casting, the aluminum alloy has stable chemical properties, good atmospheric corrosion resistance and good mechanical properties. 2.Rubber clamp:Composed of high-quality rubber and center reinforcement, it has the properties of ozone resistance, chemical resistance, weather resistance, high and low temperature performance, high strength and elasticity, and small compression deformation. 3.Bolts, flat washers, spring washers, nuts, closed pins, U-shaped hanging rin

The tie strap is used for tying 11kV or 33kV cross-arms to poles. There are steel galvanized bolts and nuts assembled.  All ferrous part is made in hot dip galvanized.

Lock nut, self-tightening nut is a common tightening lock nut, carbon steel material, galvanized process, with high hardness, durability, long service life and other characteristics.

Pigtail Bolt M16 used on wooden, concrete and other power poles for supporting clamps and at the consumer’s premises. The clamps corrosion resistance conforms to the standards.Bolts and nuts is made of hot dip galvanised steel. Ultimate Tensile strength (UTS) of the clamp is 20KN.

Eye bolts is manufactured from steel, strength designation 4.6 and meet the requirements for mechanical properties.The safe working load of any eye bolt is that load which may be safely carried in an axial direction.

There are many types of products with complete models.Hot-dip galvanized bolts, has strong corrosion resistance.Complying International standard, ensure quality.Model No.: P-7Tension strength: 70KNThe main dimensions of the Parallel hanging clevis meets the requirements of the following figure and table:The meanings of letters and numbers in the models in the table are: number--nominal failure load mark.

Galvanized round washers are suitable for many industries: construction, new energy, petrochemical, shipbuilding, communications, light industry, etc. It is made of carbon steel forging and pressing, with the characteristics of high hardness; precision machining, the thread has a fastening effect, the surface is smooth and flat, no residual burrs, no slippage, and no lack of teeth; support the processing of drawings and samples, and a variety of surface treatment processesFeatures: 1. Carbon steel material: sturdy and durable, corrosion-resistant, hard and not easy to deform.&nb

Stainless steel split pins are mostly used to prevent loosening or to lock parts, and are usually used in the tail holes of bolts or studs. The diameters of split pins for bolts of different specifications are also different.

Grade 8.8 black finish high strength nuts are made of carbon steel, with high hardness and good wear resistance; surface treatment is black, smooth and complete, the surface is smooth without burrs, and the pattern is evenly distributed; the thread is complete, the turnbuckle is deep, and the force is uniform and not easy to be silky , It is not easy to slip and lock during rotation.

Galvanized square nuts have a wide range of applications: electric power, steel structure, construction, communications, light industry and other industries. It is made of carbon steel forging and pressing, which has the characteristics of high hardness; precision machining, the thread has a fastening effect, the surface is smooth and flat, no residual burrs, no slippage, and no missing teeth; support for Laiyang processing, a variety of surface treatment processes.

The NLL wedge-shaped strain clamp has the advantages of very small hysteresis loss, light weight, and convenient installation, which meets the requirements of energy saving and consumption reduction in the transformation of the national grid. The main body of the product is made of aluminum alloy, and the bolts and nuts are made of hot-dip galvanized material.Features:1. Model : wedge type2. Material: high strength alloy aluminum3. Model No.: NLL-24. U bolt number: 2 nos M125. Tension strength: 50kNTechnical specification: Model1KV Overhead Insulated wir

The optical cable remaining rack is used to place the surplus optical cable when the optical cable is connected. Its main technical parameter is the diameter of the remaining cable rack (mm). Generally, each connector box is equipped with a remaining cable rack. Reference data: Cable storage diameter (mm): 600mm Weight (kg): 3.8 Material: galvanized steelPurpose: It is used to place the surplus optical cable when the optical cable is connected.

Square curved washer with 7/8" diameter hole for 3/4" diameter bolt. Galvanized per ASTM A-153.Features:1. Material: steel2. Finish: galvanized3. Usage: for bolts. Technical specification: 

Square flat washer with 17.5mm diameter hole for 5/8" diameter bolt. Galvanized per ASTM A-153.Features:1. Material: steel2. Finish: galvanized3. Usage: for 5/8” bolts. Technical specification: 

TJ brass bolts are suitable for connection in power transmission and distribution lines. The red copper material has good electrical conductivity and high resistance to electrical resistance. The bolt design guarantees constant contact pressure; the surface is smooth, without burrs, making the work more stable and calm.

The turnbuckle bolts are expanded and contracted by the lead screw, which can adjust the tightness of the wire rope. The components can be bundled during component transportation and loosened during installation and correction.1.Types: turnbuckle bolt, open body turnbuckle2.Material: Q235B steel  3.The main purpose:  to adjust the tightness of the wire rope, and it is widely used.4.Features: simple structure, easy processing, low cost, and strong practicability.